Tips For Caring For Your Industrial Air Tools
Your industrial air tools need to be kept in great shape so they will last as long as possible. A lot of those tools tend to cost a lot of money to replace so you are going to want to make sure that you are doing everything you can to care for them. Here are a couple of tips that you can use to do just that:
Create A Checklist For Employees
Since you probably have a lot of different things going on with your business, you are at risk of forgetting some of the maintenance that the air tools need. A checklist or schedule can avoid a lot of confusion. You will want daily, weekly, and monthly checklists and you can assign workers to various tasks. Make sure that everyone knows where the checklists are located and that they understand what they are assigned to do.
Know The Types Of Maintenance Tasks
There are a lot of preventative, maintenance tasks that need to be done in order to keep all of the air tools working in great condition. Some of the things include adding oil, replacing old air filters, checking the fasteners, and tightening them as needed. Just make sure that you are not over-tightening them, as you could cause some of the fasteners to strip, making them really difficult to remove. You should also double-check the pressure the air pressure tools are set at and calibrate as needed.
Keep The Tools Clean
Too many people make the mistake of assuming that because they are tools and bound to get dirty, they don't need to be cleaned up too often. The thing is though, the air tools need to be kept nice and clean. First, dust off excess dust or debris that is on the air tools and then use specialty cleaning solutions for your tools. There should be information in the included manuals from when you purchased them. Once everything is clean, you will be able to add as much lubricant as the tools need.
With just those few tips in mind, you should find that it is going to be a lot easier for you and your crew to good all of the industrial air tools in good shape. If you need, you can always put together a small training class that will go over all of the basics for their maintenance. For more information on air tools, contact an industrial equipment supplier such as WM.F. Hurst Co., LLC.